Are you looking for information on how to set up an MSRM WiFi extender? Are you having trouble configuring the MSRM? Do you want to be able to use your high-speed internet connection throughout your home or office, even in dead zones? Don't be alarmed if you answered yes to any of these questions! You've arrived at the right place. This guide contains simple and straightforward instructions for the MSRM WiFi extender Setup. Let's get started on the setup process right away.
Setup Instructions for the MSRM WiFi Extender are simple and straight-forward-
Before purchasing the MSRM WiFi extender equipment, confirm the presence of dead zones in your home or workplace, depending on where you intend to install the device. Before you can identify dead zones in a specific location, you must first ensure that your existing WiFi router has a consistent and active internet connection. If you choose a dead location with no signal, there is no need to install the MSRM WiFi extender because there is no signal.
Follow the step-by-step instructions given below to set up your MSRM WiFi extender:
- use the included connector to connect your MSRM WiFi range extender to an electrical outlet. Turn on the device that serves as an extension.
- Next, navigate to the WiFi selection screen using your wireless devices, such as a laptop, mobile phone, tablet, or another similar device. From the drop-down menu, select the MSRM option.
- Next, launch your preferred web browser and begin browsing the internet. To begin, enter the IP address 192.168.10.1 into the URL box of your web browser.
- You will now be directed to the MSRM extension's administration page.
- To access your dashboard, the system will prompt you to enter your login credentials.
- Fill in the login information in the appropriate fields. To finish the setup, enter the username admin and password admin.
- Sign in to your account by clicking the login button.
- Next, choose the Repeater mode from the menu. Choose the current SSID or network name of your existing wireless network from the WiFi router where you want to add more users.
- You will be given the option of creating a new wireless network or continuing to use the old network during the next stage.
- Enter the credentials for your existing wireless network in the repeater SSID box. Simply enter a different name in the box provided below to create a new network name. Make sure the password you select is the same as the one used by your current router.
- Click the connect button to save the information you've entered. Connect to the newly expanded wireless network after that.
- Your MSRM WiFi extender is now fully operational. Move your extender to a new location or a dead zone where you want to use your internet connection.
Steps for MSRM WiFi Extender Setup via WPS-
To configure your MSRM WiFi extender using the WPS method, follow the steps outlined below:
- Make sure your extender and router are in the same room before you begin installing an MSRM WiFi extender.
- Once the power LED light has stabilized, press your phone's WPS button. After that, the LED light will start blinking.
- Within two minutes of pressing the WPS button on the device, it is activated. If your device's WPS button is disabled, log in and navigate to the wireless settings, where you can enable WPS.
- The WPS light on the extension and router should then blink for about 12 seconds each.
- Once the WPS configuration is complete, the router will shut down and the WPS repeater's light will turn solid green.
- Finally, your network name will be displayed in the WiFi list as the name of the extension.
- Disconnect your extension and place it halfway between your router and the area where you want to connect to the internet.
It's as simple as that! Hopefully, by following the instructions outlined above, you will be able to successfully configure the MSRM WiFi extender. If you run into any problems during the MSRM setup process, please contact our knowledgeable support staff at our toll-free number for further assistance and guidance.
Comments
Post a Comment