Skip to main content

Ways To Factory Reset TP-Link Extender

 Many times there is a need to reset your wifi extender because of the issues and problems with the device. Whenever there are some issues with your TP-Link wifi extender and the basic troubleshooting tips don’t work you must reset the extender. Resetting a device takes it back to the default factory settings after which you can set up the device from the beginning. So, in this blog, we will explain how to factory reset TP-Link extender in two different ways. Read on to reset your device effortlessly. 



Steps To Hard Reset TP-Link Wifi Extender - 

 

The primary and most popular method to change the settings to reset your TP-Link extender device to Wi-Fi is by making use of the "RESET" button. Read the points below carefully;

  • There is a "RESET" button on your TP-Link extender.

  • It is an option that allows you to reset the TP-Link Wi-Fi extender or restore the device back to its original factory settings. 

  • This is referred to as the "hard reset”. 

  • It is accomplished by using its "RESET" button that you will generally find on the front, back, or the side of the extender range.

  • Hold and press the "RESET" button on the TP-Link range extender.

  • Keep it on for approximately 8 secs or so until you are able to see your system LED light changing from flashing at a rapid speed into slow-flashing. 

  • Other devices require that you press the switch for at least 10 minutes.

The "RESET" button typically operates in two different ways. Pressing it and holding it for around five seconds will cause the extender's capabilities to utilize WPS functions, as pressing the button for between 8 and 10 seconds will reset the range extender.

  • After the System LED light has started flashing rapidly then you are able to release the button.

  • Remain calm and just wait until to wait for the TP-Link range extender to restore to its default settings.

If you choose to use the hard reset option to reset this TP-Link extender to its default settings, you'll need to reconfigure the extender from the beginning. It is also possible to utilize the settings file however, this is only feasible when you've previously backed up the file prior to the reset.

 

Steps To Reset TP-Link Wifi Extender Using The Web Management Page - 

 

There are sometimes issues with resetting the settings of a TP-Link range extender. In some cases, even if you press and hold the "RESET" button for an extended period of time, you won't be capable of resetting the device back to its default settings. One reason this happens is that pressing the "RESET" button does not work, for whatever reason.

If it does happen, and when the "RESET" button on the TP-Link extension device fails you can reset the device back to its default settings from the beginning using the extender’s web management page.

This allows the device's web-based utility or its management site.

  1. Visit the management page for your TP-Link extender. 

  2. In your internet browser, type in the domain name "http://tplinkrepeater.net" of the TP-Link wifi extender and log in.

  3. When you're there, you'll be able to utilize this Factory Defaults feature by clicking on the System Tools menu.

  4. After you have clicked in the System Tools menu, it will open other submenus. 

  5. Click on the Factory Defaults menu below it.

  6. After you've accessed the page to the menu called Factory Defaults, you'll be asked below to press the "Restore" button to reset all of the settings on the device to its default settings.

  7. Click on the “Restore” option to reset the device.

 

TP-Link Wifi Extender Factory Reset Complete!


Thought it would be difficult to factory reset TP-Link extender? All your worries go in vain after reading this blog, right? Follow the tips carefully to reset the device effortlessly. If you still have some queries, then contact our team for instant help via a chat window on our website.
Labels:
Location: United States

Comments

Post a Comment

Popular posts from this blog

Detailed Guide On How to Setup Netgear Wifi Extender

  Are you searching for instructions on how to set up Netgear WiFi extender ? You've come to the right post if your response is a resounding yes. Online video watching might be distressing if you have to hold up a tablet or wait for a raw procedure to finish. Additionally, it can take longer, which would irritate the clients. Consider a signal amplifier to resolve this brain teaser problem (extender). Your current WiFi network's range can be simply increased with the aid of this device. In actuality, there won't be any delay in the loading of recordings onto your smart wireless device. The setup for a new extender from Netgear is fairly easy. Without much effort or hard work on your part, it will start working as soon as you connect it into a wall socket. Since Ethernet/USB cables are no longer required everywhere, connecting your home or wireless network has gotten simpler. All you need is an active and dependable internet connection. How to Install a WiFi Extender from...
2 comments
Read more

How To Setup MSRM WiFi Extender

  Are you looking for information on how to set up an MSRM WiFi extender? Are you having trouble configuring the MSRM? Do you want to be able to use your high-speed internet connection throughout your home or office, even in dead zones? Don't be alarmed if you answered yes to any of these questions! You've arrived at the right place. This guide contains simple and straightforward instructions for the   MSRM WiFi extender Setup . Let's get started on the setup process right away. Setup Instructions for the MSRM WiFi Extender are simple and straight-forward- Before purchasing the MSRM WiFi extender equipment, confirm the presence of dead zones in your home or workplace, depending on where you intend to install the device. Before you can identify dead zones in a specific location, you must first ensure that your existing WiFi router has a consistent and active internet connection. If you choose a dead location with no signal, there is no need to install the MSRM WiFi extender ...
Post a Comment
Read more

Steps To Perform For Installing TP-Link AV600 Setup

  Looking for the instructions that can help you regarding TP-Link AV600 Setup ? Wondering how to carry out important steps to set up an AV600 powerline adapter? If yes, then you have reached the right place. In this article, you will get to read about how to set up TP-Link AV600. Let’s get started with the setup instructions:    Setup TP-Link AV600 Powerline Adapter   Step 1: First, you are required to plug in the TP-Link AV600 adapter close to the router.  Step 2: After that, you have to connect one end of the Ethernet cable to the LAN and the other end to the base device or unit.    You also have to make sure that you do not plug your TP-Link’s adapter into an electrical socket, extension cord, or surge projector. It is better to use the Ethernet cable that comes along with the powerline adapters.    Step 3: In the next step, you have to plug in the “Remote” unit or device in the area.  Step 4: You are required to download the Nightha...
Post a Comment
Read more