Skip to main content

Steps For Netgear AX1800 Setup

 Have you purchased a new wifi router? Is it Netgear AX1800? Well done! You made a good choice. But, purchasing isn’t enough right? You need to set up the device and connect your wifi-compatible devices with it to use it. So here we are, with a simple yet helpful guide on Netgear AX1800 setup. In this blog, we will explain the hardware setup of the router and different methods to connect your computer with the router’s network. So, you can choose which method is appropriate for you. Dive right into the blog!



Steps For Netgear AX1800 Hardware Setup -

Read the following steps to perform the hardware setup of your Netgear AX1800 router;

  • First of all, unbox your Netgear AX1800 wifi router.

  • Now, locate your wifi router in the center of all the wifi-compatible devices.

  • Ensure that your router is close to a functional power socket.

  • Also, make sure that the router is in the reach of ethernet cables from the computer.

  • Your router should be away from thick walls, microwaves, radio, cordless phones, etc, as they affect the 

  • Now, plug in your wifi router to a power outlet.

  • Connect Netgear AX1800 to an internet modem by attaching an ethernet cable to the yellow port on the router.


Methods For Connecting To Netgear AX1800 -

You can connect your computer device to the Netgear AX1800 wifi router using any of the three methods given below;

  1. Wired Connection:

You can easily connect your computer with the Netgear AX1800 wifi router connecting the ethernet cable to the LAN port of the router;

  • Ensure that your wifi router has a consistent power supply.

  • Attach an ethernet cord to the ethernet port of your computing device.

  • Now, connect the other end of the ethernet cord to the LAN port of your wifi router.

  1. Wifi Connection:

To connect your computer with the wifi router, you just need to know your wifi router’s SSID and password;

  • Turn on your wifi router.

  • Now, visit the wifi settings on your computer.

  • Enable the wifi option.

  • The computer will scan the nearby wifi networks.

  • Click on the Netgear AX1800 SSID to connect to the network.

  • Enter the correct password in the given field.

  • That’s it your computer will connect to the wifi network.

  1. WPS Connection:

The easiest and simplest method of connecting to the wifi network is via the WPS button. But, for this, your computer and router must support the WPS button;

  • Switch on your Netgear AX1800 wifi router.

  • Press the WPS button on your wifi router, first.

  • After one or two minutes press the WPS button on your computer.

  • That’s it! It will automatically connect to the wifi router’s connection.


Netgear AX1800 Setup Wrapped Up!

Once you know how to connect your wifi-compatible devices with the router network, you can easily complete the setup. After connecting the computer with the Netgear AX1800, you can simply launch any web browser and configure your router’s settings. The above-mentioned points make the Netgear AX1800 setup easy and quick.
Labels:
Location: United States

Comments

Post a Comment

Popular posts from this blog

How to Do Orbi WiFi Extender Setup?

  With the advancement in technology, the need for the high-speed internet is also growing. Now, the users can’t bear any delayed network issues. We have seen that people will switch easily to other networks until they find an efficient wireless network. Getting reliable wireless signals becomes the challenge. A single router can provide a decent WiFi coverage within a certain range but leave certain areas of your home with poor or no WiFi coverage. If you are facing the slow WiFi signals issue then go ahead with the Orbi WiFi extender that not only boosts the WiFi signals but also eliminates the dead spots. In this blog, all you are going to know about the steps for O rbi wifi extender setup . So, without wasting any of your precious time, let us begin with the most important section of the blog.  Instructions for the Netgear Orbi WiFi Extender Setup Look at the below instructions one-by-one for the Netgear Orbi WiFi extender setup: Step 1: The first step is to unplug the exi...
Post a Comment
Read more

How Do I Setup the Nextbox WiFi Extender?

  In comparison to others, the  Nextbox wifi extender setup  is far too simple. The steps below will help you install it, access its login admin page, and configure its settings. So, without further doubt, let's begin the Nextbox extender setup process.   Nextbox Extender Installation Steps- The following are the steps for installing the Nextbox wifi extender in your home. Essentially, it will assist your router in reaching its signal range in every corner of your home. So, let's get this party started. To begin, you must unbox it. Find a suitable network signal location. Keep it there and connect it to the power source and the router network. Remove the power cable from its packaging box and inspect it for damage; otherwise, it may cause problems. So, make sure its cable and power socket are compatible and connect this power cable to both your power socket and your range extender. Wait until the signal LED stops blinking. When it starts blinking, make sure your exte...
Post a Comment
Read more

How to setup Netgear Nighthawk ac1900 modem router?

  The simplest answer to how to setup Netgear nighthawk ac1900 modem router is through the Nighthawk app. The Nighthawk app also allows you to manage your WiFi settings, view the devices connected to your network, and perform speed tests. Check Which products support the Netgear Nighthawk app to see if your product is supported. You can also configure your router using the web interface if you'd prefer to install it on a computer or if your product isn't supported. For more details, see How do I configure my NETGEAR router using the router web interface.   Utilizing the NETGEAR Nighthawk app, configure and install your NETGEAR router as follows: Get the Nighthawk application. Connect your modem to the router's Internet port after attaching any provided antennas. Start up your router. Await the WiFi LED to turn on. For your router's WiFi network name (SSID) and network key (password), check the label on the device. Your router's label can be found on the bottom or b...
Post a Comment
Read more