Skip to main content

What To Do When A TP-Link WiFi Extender Is Not Working?

 Nowadays, mostly everything involves internet usage. So, no one can afford a poor internet connection in their house or office. TP-Link extender delivers a great signal strength and network coverage; sometimes it can also stop working due to some issues in connection or otherwise. There can be many reasons for your TP-Link wifi extender not working. But, all you need is the right troubleshooting guide, and you can rule out the problems and resume having a faster and better internet. 




Points To Make TP-Link Wifi Extender Work - 


  1. Ensure the power is enabled;

  • Connect the power cable properly to the printer and the power supply socket. The electricity supply should be consistent and regular. 

  • The power LED light indicator must be lit and stable implying that the printer is receiving power. If the LED light is blinking then it implies it is trying to receive power but the connection is not established yet. 

  • You can connect the extender to the wifi router using a wired or wireless method of connection according to your preference


  1. Make sure the internet is working fine;

When the TP-Link wifi extender is not working then there are chances that the wifi router to which it is linked has poor network signals and connection. 

  • Ensure that the wifi network is active and stable. The internet should be good. 

  • To check if there is a problem with the wifi router network, connect any device to the wifi router directly and access any web page, if it loads then it implies the internet is good. 

  • If it is not accessible, then contact the ISP for further information on it.


  1. TP-Link wifi extender firmware update; 

Sometimes the reason behind the TP-Link extender not working is due to the outdated or corrupt firmware versions. 

  • For this, you need to keep a check on the recent versions of firmware and upgrade it accordingly. 

  • To update the firmware go to the tplinkextender.net website. 


  1. Perform power cycle on your device;

If you have attempted all the steps mentioned above then, try rebooting the device. 

  • Sometimes restarting a device refreshes the system which makes it work better. 

  • For that, switch off the TP-Link wifi extender and leave it idle for approximately 5 minutes. 

  • After that, switch it on and then check if the TP-Link wifi extender is working or not. 


  1. Hard reset function;

If nothing responds and you are still not able to use the TP-Link wifi extender then it is recommended to perform a hard reset function. 

  • For that, you need to take a pointed object like a pen, pencil, or pin and then locate the reset button on the device. 

  • Press it and your device will be reset. Check whether the issue is resolved or not. 

  • Though hard reset resolves the matter and your TP-Link wifi extender will start working.



Your TP-Link Wifi Extender Is Working!


When you perform the above-mentioned troubleshooting tips properly, you will not face any problems in using your wifi extender. When your TP-Link wifi extender is not working then check for the various aspects as stated above and perform troubleshooting steps accordingly. Now, you are sorted and can enjoy glitch-free internet with your TP-Link wifi extender. 
Labels:
Location: United States

Comments

Post a Comment

Popular posts from this blog

Understanding Spectrum Router Red Blinking Light - Troubleshooting and Fixes

  Is your Spectrum router blinking red? Well, that’s not a disco light party you should be thrilled about. It actually means your WiFi is having trouble connecting to the internet. But fret not, because I’m here to guide you through the troubleshooting process. Let’s fix the   spectrum router blinking red   issue together. We’ll have your internet up and running in no time! Understanding the Blinking Red Light: Before we jump into the solutions, let’s decode the mystery of that pesky red light. A blinking red light on your Spectrum WiFi router indicates that the router is unable to connect to the internet. This issue commonly occurs after Spectrum service outages, especially with Wave 2 and WiFi 6 router models. Now that we’ve cracked the red light code, let’s move on to the solutions. Follow the steps to fix Spectrum Router Red Light- Step 1: Restart your Spectrum Router The first and easiest step to take when faced with a blinking red light on your Spectrum router is to perform a sim
Post a Comment
Read more

Detailed Guide On How to Setup Netgear Wifi Extender

  Are you searching for instructions on how to set up Netgear WiFi extender ? You've come to the right post if your response is a resounding yes. Online video watching might be distressing if you have to hold up a tablet or wait for a raw procedure to finish. Additionally, it can take longer, which would irritate the clients. Consider a signal amplifier to resolve this brain teaser problem (extender). Your current WiFi network's range can be simply increased with the aid of this device. In actuality, there won't be any delay in the loading of recordings onto your smart wireless device. The setup for a new extender from Netgear is fairly easy. Without much effort or hard work on your part, it will start working as soon as you connect it into a wall socket. Since Ethernet/USB cables are no longer required everywhere, connecting your home or wireless network has gotten simpler. All you need is an active and dependable internet connection. How to Install a WiFi Extender from
2 comments
Read more

How to set up TP-Link WiFi extender?

  We'll walk you through how to set up a TP-Link WiFi Extender step-by-step. To install the extender, follow the steps below: Connect With A Router There are two ways to set up the extender. The manual method (using an Ethernet cable) is the first, and the WPS method is the second. One of them is mentioned further down this page. You can choose either of them at your leisure. (With Ethernet Cable). TP-Link WiFi Extender Setup Manual The TP-Link extender must first be connected to your computer via an Ethernet cable. Then, to set up your TP-Link WiFi Extender with an Ethernet cable, follow the steps outlined below. 1. Make sure your TP-Link WiFi extender is turned on. 2. Connect it to your computer using an Ethernet cable. 3. Open any web browser and type "192.168.0.254" into the URL box. A TP-Link webpage will now appear on your screen. 4. Select Quick Setup and then proceed to the next step. 5. Select your region before going on to the next step. 6. Your TP-Link extend
Post a Comment
Read more