Skip to main content

User Manual Guide to Change TP-Link Range Extender Password

 Most of the users have noticed during logging into the TP-Link wireless range extender that a login field asks for entering the device default password. Have you ever thought about what this password is for? If you never thought about it then don’t worry. Well, it is the tp-link range extender password that is needed to be filled into the password field. Basically, it is the default password that is used to pass the authentication process of the TP-Link extender. Here, in this blog, we have described the simple process to change the TP-Link range extender default password and the steps to reset the TP-Link range extender. Keep reading till the end and check out the steps. 




Instructions to Change the TP-Link Range Extender Password

Look at the below steps to change the TP-Link WiFi range extender default password:

Step 1: The first step is to plug-in your TP-Link WiFi range extender into the power socket which is nearer to the place where you get fewer signals.

Step 2: After that, connect your extender device and the computer by using the Ethernet cable. Plug-in one end of the Ethernet cable to the device and the other end to the computer.

Step 3: Thereafter, go to the web interface of the TP-Link WiFi range extender from your device. You will find it on the TP-Link login page screen. 

Step 4: Now, you will see that the TP-Link login web page displays on your screen where you need to enter the login credential details such as username and password. 

Step 5: Enter admin in the both username and password fields. 

Step 6: Next, tap on the login button.

Step 7: You will be redirected to the TP-Link admin settings web page.

Step 8: Once you reach the admin setting page, you will see the option to change the default password. 

Step 9: Enter the new password of your choice that you want to set for your device. Again enter the password for the confirmation. 

Step 10: Hit on the Apply button to save the settings made by you on the computer.

Step 11: Now, you will see that your device will restart automatically. Try to login into the TP-Link WiFi range extender with the new password. 


How to Reset the TP-Link Range Extender Default Password? 

One of the simplest ways to reset the TP-Link WiFi range extender is using the reset button. Here are the steps to reset the default password of the extender:

Step 1: The first step is to find the reset button on your TP-Link range extender. You will easily find the reset button on the backside of the extender.

Step 2: Once you find the reset button then press the button using the paper clip or needle (any sharp pinpointed object). Hold the button for 12-15 seconds until the TP-Link wireless range extender restarts itself. 

Step 3: Thereafter, your extender will be changed automatically to its factory default settings. Enter the default password to access the TP-Link WiFi range extender web page. 


We hope that this blog is helpful for you in changing the TP-Link range extender password and resetting the extender to the factory default settings. In case of any doubt, you can talk to our support team through a live chat option. 


Comments

Popular posts from this blog

Detailed Guide On How to Setup Netgear Wifi Extender

  Are you searching for instructions on how to set up Netgear WiFi extender ? You've come to the right post if your response is a resounding yes. Online video watching might be distressing if you have to hold up a tablet or wait for a raw procedure to finish. Additionally, it can take longer, which would irritate the clients. Consider a signal amplifier to resolve this brain teaser problem (extender). Your current WiFi network's range can be simply increased with the aid of this device. In actuality, there won't be any delay in the loading of recordings onto your smart wireless device. The setup for a new extender from Netgear is fairly easy. Without much effort or hard work on your part, it will start working as soon as you connect it into a wall socket. Since Ethernet/USB cables are no longer required everywhere, connecting your home or wireless network has gotten simpler. All you need is an active and dependable internet connection. How to Install a WiFi Extender from...

How To Setup MSRM WiFi Extender

  Are you looking for information on how to set up an MSRM WiFi extender? Are you having trouble configuring the MSRM? Do you want to be able to use your high-speed internet connection throughout your home or office, even in dead zones? Don't be alarmed if you answered yes to any of these questions! You've arrived at the right place. This guide contains simple and straightforward instructions for the   MSRM WiFi extender Setup . Let's get started on the setup process right away. Setup Instructions for the MSRM WiFi Extender are simple and straight-forward- Before purchasing the MSRM WiFi extender equipment, confirm the presence of dead zones in your home or workplace, depending on where you intend to install the device. Before you can identify dead zones in a specific location, you must first ensure that your existing WiFi router has a consistent and active internet connection. If you choose a dead location with no signal, there is no need to install the MSRM WiFi extender ...

Steps To Perform For Installing TP-Link AV600 Setup

  Looking for the instructions that can help you regarding TP-Link AV600 Setup ? Wondering how to carry out important steps to set up an AV600 powerline adapter? If yes, then you have reached the right place. In this article, you will get to read about how to set up TP-Link AV600. Let’s get started with the setup instructions:    Setup TP-Link AV600 Powerline Adapter   Step 1: First, you are required to plug in the TP-Link AV600 adapter close to the router.  Step 2: After that, you have to connect one end of the Ethernet cable to the LAN and the other end to the base device or unit.    You also have to make sure that you do not plug your TP-Link’s adapter into an electrical socket, extension cord, or surge projector. It is better to use the Ethernet cable that comes along with the powerline adapters.    Step 3: In the next step, you have to plug in the “Remote” unit or device in the area.  Step 4: You are required to download the Nightha...